A one step solution to algae and mound problems on boats, sails, canvas and marinas - protect your investment


Boatclene - A biodegradable boat wash, safe & kind to the environment

Advanced cleaning system

Boatclene is an effective cleaner for use on boat topsides and hulls to remove dirt, grime and environmental staining, including the build-up of salt deposits.

Boatclene can be used on most surfaces including GRP, timber, glass and Perspex, Hypalon and uPVC (as found on RIBs) as well as aluminium and stainless steel fixtures and fittings.

Working with the environment

Detergents that contain phosphates can cause local oxygen depletion and encourage algal blooms resulting in localised suffocation of aquatic life.

Cleaning products used on boat hulls and decks often contain chlorine, ammonia, potassium hydroxide, bleach, petroleum products and solvents. All of these can be very harmful to the aquatic environment and damaging to the surfaces they are applied to, particularly aluminium fixtures.

Boatclene contains no harmful chemicals and can be safely applied to boats which are already in the water.

Easy to apply

Boatclene is easy to apply using the supplied hose end applicator attached to a domestic hosepipe using a standard Hoselock™ connector or similar.

Using the water tap on the applicator (coloured white), wash over the whole area to be cleaned. Once the area is thoroughly wetted, turn on the Boatclene tap (coloured blue) and simply apply to the surface to be cleaned. Lightly agitate with a soft brush or sponge to lift any accumulated dirt before washing off with clean water before the product has had time to dry.

When used as directed, Boatclene will not cause any damage to the surfaces of your boat, leaving you with a great finish, safe in the knowledge that you have not done any harm to the environment.

Boatclene can be supplied as a trigger spray to tackle smaller areas.

Applications – Boatclene

  • Boat topsides & hulls
  • RIBs & tenders