Distributors for the complete range of Cleresolutions products

Case Studies

Case Study – Timberclere

'...A one step solution to algae and mould problems on decking, patios, driveways, garden sheds and garden furniture...'

Decked children’s area in the Sensory Garden, Windlesham House School

After a single application of Timberclere all of the algae has been removed, even from areas that would be difficult to clean by hand, such as around the bottom of the fencing, the sides of the steps and even on the surrounding brick walls.

‘...did it really do that. Wow! Well, one less problem to worry about. Thank you...’

SM - Windlesham House School

  • Single application - removes algae and prevents regrowth for up to 6-12 months.
  • Easy to apply - spray on using a standard hosepipe.
  • Large coverage - 1L dilutes to 40L with the special applicator provided, giving up to150m2 of coverage.
  • Biodegradeable & environmentally friendly - no special precations need to be made; children, plant & pet friendly.


1 Litre Concentrate w/ applicator (auto-dilutes at 40:1)
5 Litre refill

Typical coverage 150m2
Typical coverage 750m2

How to Apply...

  • Remove any loose debris from the area being treated, allowing the product to treat the surface directly.
  • Apply to dry surfaces to avoid the product becoming over-diluted.
  • Thoroughly wet the surface to be treated with Heritageclere using the applicator or a pressure sprayer.
  • Allow to dry fully.
  • As the Garden & Heritage Range is deliberately non-aggressive, full results may not be seen for up to five to seven days.
  • Areas suffering from particularly heavy growth of algae or mould may require a second application.

Why use the Cleresolutions Garden & Heritage Range?

  • Completely bio-degradable – the Garden & Heritage Range is a water-based protection system.
  • Easy to apply - no scrubbing, no brushing and reaches all those awkward areas with no extra effort.
  • Controls 99.99% of all algae, bacteria, moulds, fungi and prevents their reappearance.
  • Environmentally friendly - does not affect plant life in its dilute form.
  • Non-aggressive – does not contain bleaching agents or acids that damage the surface being treated.
  • Removes algae and mould. As part of a seasonal maintenance programme, provides long-term protection against growth of algae and mould - a one step solution to algae and mould problems on decking, patios, driveways, garden sheds and garden furniture.

How to use the hose end applicators - just plug in and spray

Cleresolutions products can be easily applied with our hose end applicator which attaches to any domestic or garden hose pipe using a standard HoselockTM connector or equivalent.

The applicator automatically dilutes the product as its applied.

As easy as watering your garden, just plug the applicator connector (A) into the connector oyour hosepipe and then turn the tap on. Turn the water feed tap (B) through 90 degrees to switch the water on and then turn product feed tap (C) through 90 degrees to start apply the product.

Wash the surface to be treated with a generous coating of Cleresolutions product making sure that the surface is thoroughly wetted. When you have completed applying the product turn taps B and C off and disconnect from the hosepipe. The surface should be left to dry.